The VirtFusion control panel is where you manage your VPS yourself: power it on and off, watch its usage, reinstall it and reach it when SSH fails. This guide walks through each area so you know where to find things before you need them.
Before you start
- Your VPS provider's panel address and your login, or access through your billing area's single sign-on.
- Your server's root password or SSH key.
Log in to the VirtFusion control panel
- Open the panel from your billing area's service page, or go to the panel URL your provider sent you.
- Sign in, complete two-factor authentication if enabled, and select your server.
Power controls
| Action | What it does |
|---|---|
| Start / Boot | Powers on a stopped server |
| Restart | Asks the OS to reboot cleanly |
| Shutdown | Asks the OS to power off cleanly |
| Power off / Stop | Cuts power immediately, like pulling the plug; use only if the OS is frozen |
Resource graphs and traffic
The overview shows CPU, memory, disk I/O and network graphs plus monthly traffic used against your allowance. Sustained 100% CPU or near-full traffic are signs to optimise or upgrade; see high CPU and RAM usage.
Console, rebuild and rescue
- VNC: reach the server screen in your browser (VNC console guide).
- Rebuild: reinstall a fresh OS; this erases the disk (rebuild guide).
- ISO / boot order: if enabled, mount an ISO for manual installs or recovery.
Network: IPs and reverse DNS
- See your IPv4 and IPv6 addresses in the network section.
- Set reverse DNS (rDNS/PTR) for each IP if allowed, for example
mail.example.com. Mail servers need a matching rDNS and A record to avoid spam folders.
Firewall, backups and SSH keys
- Firewall: filter traffic before it reaches your VPS (firewall guide).
- Backups: view and restore backups if your plan includes them.
- SSH keys: save public keys in your account to use them on rebuilds.
Tip: Enable two-factor authentication on your panel account. Anyone who logs in can rebuild and wipe your server.
Troubleshooting
- Server will not start: it may be suspended for billing; check your invoices.
- Graphs empty: new servers need a few minutes to collect data.
- rDNS not updating: make sure the A record exists first; changes can take time to propagate.
Frequently asked questions
What is the difference between shutdown and power off?
Shutdown lets the OS close cleanly; power off is instant and can corrupt open files.
Can I upgrade my plan from the panel?
Upgrades are usually ordered from your billing area, which then resizes the server.
Why can I not change rDNS?
Your provider may need to enable it or approve it on request.